Wall-hung, freestanding, or double basin, installed right.
A vanity install sounds simple but gets complex quickly: wall blocking, plumbing alignment, waste trap height, benchtop overhang. We match you with Adelaide vanity specialists.
Typical spend
$0.0k
Range
$1k – $3k
Duration
1–3 days
Vanity project — typical spend $1.6k, 0-week average build
About Vanity Installation
A new vanity changes the look of a bathroom more than almost any other fitting, and unlike a full renovation, it is a one-day job in most cases. But the installation details matter: get them wrong and the vanity looks rented.
Wall-hung vanities are the most popular choice in modern Adelaide bathrooms, but they need the wall behind them to be ready. Timber stud walls typically have blocking added during the wet-area rebuild, but if you are doing a vanity swap only, the existing wall might not have blocking in the right place. Our installers cut and patch as part of the job.
Plumbing alignment is the second detail that separates good installs from bad. Vanity manufacturers set waste outlets at standard positions, but older Adelaide plumbing often sits 50mm to 100mm off. A good installer will relocate either the vanity mounting or the plumbing to hit a clean alignment. A rushed installer will fudge it with bent pipes or flexi extensions that fail at inspection.
Silicone and finishing are the final detail. A clean bead between the benchtop and the wall, a matching silicone at the basin-to-benchtop joint, and a straight 90-degree line along the front edge all distinguish a polished install from a DIY-looking one.
Common situations our network handles.
Recognise any of these?
- The new vanity arrived but the plumbing alignment does not match.
- You want wall-hung but the wall behind does not have timber blocking.
- The previous vanity has gone mouldy on the kickboard and you want a full replacement with new plumbing.
- You bought online and need a professional installer to do it right.
Here is what we do about it.
- Wall blocking additions where the wall is not structurally ready for wall-hung vanities.
- Plumbing relocation or extension for alignment with the new vanity's waste and water supply.
- Benchtop levelling and silicone to the wall for a clean finish.
- Tap and mixer installation with correct torque and alignment.
A recent transformation from the network.
A visual sample of this speciality.
Vanity Installation: your questions.
How much does it cost to install a bathroom vanity in Adelaide?
+
Standalone vanity installation (supplied by homeowner) in Adelaide typically runs $850 to $1,800 for a standard unit. Wall-hung installs with additional blocking can reach $2,400. Add $150 to $400 for plumbing relocation if the waste and supply do not align.
Can I install a vanity myself?
+
The carpentry is straightforward. The plumbing connections must be done by a licensed plumber in South Australia. Our network pairs a carpenter-installer with a licensed plumber to do both in a single visit.
What is the best vanity height?
+
Standard vanity height is 880mm to 900mm top of benchtop. Taller households often go to 920mm or even 940mm for better ergonomics. Accessibility-focused vanities can drop to 820mm for wheelchair use.
Wall-hung or freestanding?
+
Wall-hung makes the floor visible, which visually enlarges a small bathroom. It requires wall blocking to support the weight. Freestanding is simpler to install and hides plumbing. For small bathrooms (under 5sqm) wall-hung wins. For large bathrooms, either works.
Three Vanity quotes, free.
Tell us about your project. We match you with three Adelaide renovators who specialise in vanity work.
Related services
Get 3 vanity quotes from Adelaide's network
Fixed-price, line-itemised, within 24 hours. You choose which renovator wins the job. The service is free.