Bathroom waterproofing compliance checklist, Adelaide.
Eighteen checks covering SA licensing, surface prep, application, curing, and warranty. Use before tiling starts on any Adelaide bathroom renovation to catch compliance gaps while they are still fixable.
AS 3740:2021 + SA Licensing
Bathroom waterproofing compliance check
Applicator holds a current SA waterproofing licence (separate from builder's licence)Critical
Building Work Contractors Act 1995 (SA)
Applicator carries public liability insurance ($20M minimum)Critical
Industry standard
Written waterproofing certificate provided post-completion (includes AS 3740 reference)Critical
AS 3740:2021
Substrate fully cleaned, dry, and free of dust before membrane goes downCritical
AS 3740:2021 Section 3.3
Primer applied to manufacturer specification and cured before membraneCritical
AS 3740:2021 Section 3.4
All wall-floor junctions, corners, and penetrations bond-breakered and filletedCritical
AS 3740:2021 Section 3.5
Floor waterproofed 100% (entire floor, not just shower base)Critical
AS 3740:2021 Section 2.2
Shower walls waterproofed full-height (minimum 1800mm above floor)Critical
AS 3740:2021 Section 2.3
Non-shower walls waterproofed 150mm above floor levelCritical
AS 3740:2021 Section 2.3
Shower hob and wall-floor junctions treated with reinforcing tape or fillet beadCritical
AS 3740:2021 Section 2.4
Minimum two coats of membrane applied at right anglesCritical
AS 3740:2021 Section 3.6
Each coat cured minimum 48 hours before next trade (or per product spec)Critical
Manufacturer spec
Flood test performed on floor membrane (minimum 24 hours, 25mm water depth)
AS 3740:2021 Section 3.7
Independent inspection or photographic evidence of membrane coverage
Industry best practice
Minimum 7-year written waterproofing warranty (longer is typical for licensed applicators)Critical
SA statutory warranty + industry norm
Photographic records of every membrane stage provided to homeowner
Industry best practice
Membrane product code, manufacturer, and batch number recorded
AS 3740:2021 Section 3.8
Compliant checks
0 / 17
Open gaps
0
Critical gaps
0
All critical covered
Every renovator in our network carries a valid SA waterproofing licence.
Get matched with three Adelaide renovators whose waterproofers hold current SA Building Work Contractor licences with waterproofing endorsement.
The cost of getting waterproofing wrong.
Warranty voided
Non-compliant waterproofing voids your SA statutory warranty. Any downstream failure becomes your cost, not the renovator's.
Insurance complications
Home insurance typically excludes water damage from non-compliant waterproofing. Claims for ceiling collapse or adjacent-room flooring damage get denied.
Full rebuild to remediate
Once tile is over non-compliant membrane, the only remediation is strip to slab and start over. Typical Adelaide remediation cost: $12,000 to $28,000.
Adelaide bathroom waterproofing compliance questions.
What is AS 3740 and why does it matter for Adelaide bathrooms?+
AS 3740:2021 is the Australian Standard for bathroom waterproofing. It is called up by the National Construction Code and adopted under the Building Work Contractors Act in South Australia. Any bathroom renovation in Adelaide that tiles over non-compliant waterproofing voids the statutory warranty and is a ticking time bomb for mould, structural rot, and shower leaks into adjacent rooms.
Do I need a separately licensed waterproofer in SA?+
Yes. In South Australia, waterproofing is a separately licensed trade under the Building Work Contractors Act 1995. A general builder's licence does not cover waterproofing work. Ask for the waterproofer's specific licence number and verify via cbs.sa.gov.au before tile goes down.
What areas of the bathroom floor and walls need waterproofing?+
Floor: 100% of the bathroom floor (not just the shower base). Shower walls: full-height, minimum 1800mm above floor. Non-shower walls: minimum 150mm above floor level. Wall-floor junctions and all penetrations (drains, waste, tap tails) require reinforcement with fillet bead or reinforcing tape.
How long should each waterproofing coat cure before the next trade?+
Minimum 48 hours between coats at normal temperatures, or per the specific manufacturer's data sheet. In Adelaide winter, extend to 72 hours. Skipping the cure is the single most common reason waterproofing fails within five years.
What warranty should I expect on Adelaide bathroom waterproofing?+
Seven years is the minimum statutory warranty under SA law. Most licensed applicators offer ten to twenty years on the membrane itself, provided the tiling and fixture installation is also done by licensed trades. Ask for the warranty certificate with product code, batch number, and applicator licence number.
What does a flood test involve?+
After the floor membrane cures, the waterproofer plugs the drain and floods the bathroom floor with 25mm of water for 24 hours. If the membrane holds, the room is certified. If water drops, the breach gets patched and re-cured before tiling starts. Flood tests are not legally required but are the gold-standard quality check.
Hire only licensed Adelaide waterproofers.
Every renovator in our network carries current SA Building Work Contractor licences with waterproofing endorsement.